Advertising light boxes
Advertising light box production
Materials
Keel: made of wooden strips or angle iron or aluminum alloy profiles.
Light source: Two sets of fluorescent tubes.
Panel: Plexiglas color plate or swatch.
Bracket: Triangular iron frame.
Making Tools
Electric drill, cross screwdriver, screwdriver, screwdriver, hacksaw, wood saw, shovel, hammer, pliers, small nails, latex hook knife, wire saw, plexiglass glue.
Production Points
Design: According to the design requirements required by the customer, formulate the size, color, font, primary and secondary arrangement of the light box, and place the graphics and text horizontally and vertically. In addition, the brackets must be determined at the installation site. Based on the design, the size, font, and color of each character are calculated for word search.
Keel: generally hexahedron. Ingredients: or.
Angle iron: If possible, you can process it by yourself. If not, you can process it externally.
Wood: Use centimeter square wood for nailing.
Cutting: The length and width of each four pieces are minus .cm from the length of the wood. Apply white latex to the sawed tenons at both ends and nail them on. The thickness dimension is minus two material thickness + thickness length. Then apply white latex and nail it on. Water Cube channel advertising.
Aluminum material: The height, width and length of the base cabinet made of aluminum alloy remain unchanged. Sawing angles are connected with plug-ins.
Andon: Generally, two or three fluorescent tubes are used.
For lamps that are one meter long, use light boxes that are more than one meter long. Lamp tubes . meters long are used in light boxes above . meters. The thickness is generally in centimeters.
Upper board: When nailing small nails, first use an electric drill to drill a small hole, otherwise the hard nails will crack. Nail on the very edge, just three or four nails over one meter long. The wide side panels only require one nail. Drill holes in the side to pass the wires through.
Aluminum strips: The length and width of aluminum corners are larger than those of high-quality plexiglass panels. Aluminum angle-head saw-cut screws are nailed to the thick sides and the front includes regular script. The nails are never visible. Paste organic characters: Arrange the characters on the surface of the light box according to the design, lightly mark the grid, straighten the characters, and then paste them with plexiglass glue. There are two methods of pasting. One is to apply organic glue with drops, and the other is to use a medical needle to suck the organic characters. Glue lightly injects around the edges. The second is better than the first. Check to see if there are any typos or missing words. Check whether each word is glued firmly and whether there are any missing words.
Cleaning: Use a small piece of clean cloth dipped in water and squeeze some toothpaste to wipe it evenly, then use a piece of cloth dipped in water to wipe a large area with water so that the cloth does not get wet easily.
Advantages of advertising light boxes
Environmentally friendly and durable
The light box adopts ultra-thin design
It adopts high-quality light source and the light box is long-lasting, reliable and durable, with a long life and extremely low maintenance costs
Diverse designs are flexible and changeable The flashing mode makes the advertising effect more effective
Low-voltage DC power supply, energy-saving and safe, aluminum alloy frame is safe and environmentally friendly.
Wide application
The light box is widely used in shopping malls, hairdressing and beauty chain stores, train stations, highway toll stations, parking lots, hotels, entertainment venues, banks, photo studios and other places.
Factory direct sales advertising light box trash can solar advertising trash can professional production