Advertising light box
Continuous flashing combined with staying effectively improves people's visual impact, improves the utilization rate of advertising unit area and changes the light box and The advertising effect is self-evident like the scrolling light box. The advertising light box combines the advantages of neon lights and can continuously flash during the day and night to attract people's attention. Various text patterns alternately jump in an orderly manner to create a strong visual impact. Satisfying the visual experience of viewers drives advertisers to obtain maximum economic benefits. Electronic flashing light boxes will be a shining pearl of dynamic light boxes in the future advertising industry.
Advertising light box production
Production materials
Production of keel wood strips or angle iron or aluminum alloy profiles.
Two sets of light source fluorescent tubes.
Panel plexiglass swatches or swatches.
Bracket triangle.
Production Tools
Electric drill, cross screw driver, screwdriver, screwdriver, hacksaw, wood saw, shovel, hammer, pliers, small nails, latex hook knife, wire saw, plexiglass glue.
Production Points
Design the size, color, font, primary and secondary arrangement of the light box according to the design requirements required by the customer, and place the graphics and texts horizontally and vertically. In addition, the brackets must be determined at the installation site. Based on the design, the size, font, and color of each character are calculated for word search.
The keel is generally hexahedron. Materials or.
Angle iron can be processed by yourself if necessary, but it can be processed externally.
The wood is nailed with centimeter square wood.
The cutting length and width are four centimeters each minus the length of the wood. Apply white latex to the sawed tenons at both ends and nail them on. The thickness dimension is minus two material thickness + thickness length. Then apply white latex and nail it on. Water Cube channel advertising.
The height, width and length of aluminum alloy floor cabinets for aluminum materials remain unchanged. Sawing angles are connected with plug-ins.
Andon generally uses two or three fluorescent tubes.
For lamps that are one meter long, use light boxes that are more than one meter long. Lamp tubes . meters long are used in light boxes above . meters. The thickness is generally in centimeters.
When nailing small nails on the board, first use an electric drill to drill a small hole, otherwise the hard nails will crack. Nail three or four nails at the very edge, which is more than one meter long. The wide side panels only require one nail. Drill holes in the side to pass the wires through.
The length and width of the aluminum corners used for the aluminum strips are larger than those of the superior plexiglass panels. Aluminum angle heads are cut at D angles and the screws are nailed to the thick sides and the front includes regular script. The nails are never visible. Paste the organic characters. Arrange the characters on the surface of the light box according to the design. Gently mark the grid, straighten the characters, and then use organic glass glue to paste them. There are two methods of pasting. One is to apply organic glue on it, and the other is to use a medical needle to suck up the organic glue. Gently inject the edges. The second is better than the first. Check to see if there are any typos or missing words. Check whether each word is glued firmly and whether there are any missing words.
To clean, use a small piece of clean cloth dipped in water and squeeze some toothpaste to rub evenly, then use a piece of cloth dipped in water to wipe a large area so that the cloth does not get wet easily.
Advertising light box crystal light box LED light box Xiamen light box factory customization